Custom Design & Build Projects – Industrial
 

Bus Shelters / Bus Stops
 

DMS technologies manufactures specialist rechargeable battery packs for use in bus stops and bus shelters to power LED's for lighting and display illumination. These packs have been specifically designed to fit inside the frames or poles and are charged via solar panels mounted on the shelter roof or bus-stop pole. Apart from the savings made through the use of solar power, these products help provide improved communication plus added

safety and comfort for passengers. The sealed lead acid cells used for this application have an operating temperature range from -40°C to +80°C and benefit from excellent shock and vibration resistance making them ideal for the purpose. Their resistance to corrosion, longer operating life than other battery technologies as well as an ability to accept trickle charging makes the Cyclon range the natural choice.

Click here for Cyclon Application Guide

Click here for Cyclon Datasheet

Switch-Tripping
 

The Cyclon cell is ideally suited to switch tripping applications. It’s ability to deliver a pulse current 20 times its nominal capacity is one of Cyclon’s key features. The Cyclon range can be configured to meet all nominal DC voltages used in the electrical supply industry namely: 12, 24, 30, 48 and 110V. In areas of extreme climate the Cyclon range could well be considered as it has a wide operating
 

Wireless Power Hub 

ISIS Concepts supplies furniture to schools, colleges and universities.  We were able to help Isis develop a power hub, incorporating a battery and inverter    This new Wireless Power Hub supplies power to any device for up to six users.  Static (without wheels) or mobile (mounted on castors), wireless (rechargeable, provides six hours of power from an overnight charge) or wired (plugged into a floorbox, can also be used to route data cables).  

The user can organise power as and where it is required. Compatible with any electrical device and for use anywhere power is required. The new power hub is ideal for classrooms, breakout spaces, open-plan learning zones, libraries and even outdoors (mobile only and strictly in dry conditions).

Contact ISIS for more information

NEW : 12V & 24V Low Voltage Disconnect Units 

Protect your battery from over discharging by using our new LVD. Designed to operate either 12V or 24V nominal voltages with a factory default disconnect setting of either 10.8V or 21.6V which can be adjusted to suit specific requirements. 3 state of charge LED's adjust automatically when on load providing an accurate visual indication of battery capacity. The LVD can control currents up to 10A on board and can control an external relay to allow for load currents up to 200A
 

• Easy to set up

• 12V nominal voltage with 9.9V - 12.8V adjustable disconnect voltage

• 24V nominal voltage with 19.8V - 25.6V adjustable disconnect voltage

• Optional automatic reconnect

• Very low power drain

• Remote indication & operation

• Lightweight & compact

• Wide operating temperature

• Fully protected against spikes, surges & reverse polarity

Click here for LVD Datasheet

NEW : Split Charger for 12V & 24V Systems
 

The Red Flash Split Charger is an ultra low power loss device that can be used to charge separate battery banks from a single source. The Red Flash Split Charger will disconnect the link between battery banks when the charging source (the alternator in this case) is switched off. On systems that contain multiple banks charging from a single source, a split charger can help extend the life of your batteries by ensuring a balanced charging regime. The split charger is very easy to set up, and is supplied with full instructions and circuit diagram. The unit has incredibly low power consumption, particularly when compared with other diode splitter systems. A range of current ratings are available including 60A, 90A and 120A, with various input/output arrangements.

• Easy to set up

• Ultra low power loss

• 6V - 30VDC voltage range

• Suitable for 12V & 24V systems

• Can be used in series or parallel

• Suitable for all types of alternators

• Visual charge indication

• Lightweight & compact

• Wide operating temperature

Click here for Split Charger Datasheet

PowerStart engine start range
 

DMS technologies manufactures a range of engine start powerpacks for Serenco – a European supplier of high quality, specialist automotive tools and equipment. The PowerStart range of Serenco includes separate 12V and 24V powerpacks.
 

Click here to visit Serenco for automotive tools and equipment:  www.serenco.co.uk

Motorbike-mounted Engine Start Powerpack
 

A leading UK vehicle breakdown response organisation had a requirement to carry an engine start pack on their fleet of motorbike-mounted response units used in busy cities across the UK. In order to fit under the seat, DMS designed, for Serenco UK, a small powerpack featuring a high rate battery, isolator switch, high quality

leads and crocodile clips, LED “push-to-test” state of charge indicator, surge and spike protection and “on-bike” charging. The resultant pack was half the size of any unit with a similar performance as well as saving 0.75kg in weight allowing the patrol to carry more vehicle recovery equipment.

Click here to visit Serenco

HeadCam Battery Pack
and Charger
 

The battery system provides power for a helmet mounted camera and an internal SD card recorder. Providing over 2 hrs of high resolution recording

time, the head camera and battery unit is fully waterproof and is currently used to improve training techniques and increase safety.